Heavy Duty Portable Handcart Filter Pumps - HP Series

Portable Filters HP Series - #1604

Double Capacity: 10 and 30 GPM Versions

Remove Water & Dirt From Oils and Fuels

DESCRIPTION

Double capacity HP Series Portable Filter Pumps are recommended for oils with higher concentrations of dirt, water and other contaminants. Two models are offered with a choice of 10 and 30 gpm flow rates.


The HP30, thirty-gallons per minute model is the preferred choice at electrical utility installations for transferring and filtering insulating oil. It has been proven to be economical, fast, and efficient for applications of this type involving larger volumes of oil.


The HP Series two-cartridge design filters and holds more than twice as much contaminant as single cartridge units. Several different types of filter cartridges are offered for specific applications. Cartridges can be changed in only a few minutes.


HP Series Filter Pumps are highly portable. Large pneumatic wheels allow the units to be moved over soft and irregular surfaces by one person. Rugged, welded steel construction makes them suitable for operation in the most difficult and demanding industrial environments. Units are completely self-contained and require only electrical power to operate.


FILTER CARTRIDGES


Dirt Removal: For dirt particles, use two FO-718PL Series large surface area pleated media cartridges. For colloidal contaminants, two FO-618FGA Series fiberglass depth cartridges are recommended.
Dirt and Water Removal: Use two Aquacon® AC-718 Series free water absorbent cartridges. Each removes 1 to 2 quarts of free water and also filters dirt particles.


Aquacon® Cartridges have a unique inner absorbent media. Absorbed water is chemically locked in. When the cartridges reach their water holding capacity, their accordion pleats swell shut. This causes an increase in the differential pressure which signals the operator to change the cartridges.

APPLICATIONS


PLEASE NOTE: Use of Aquacon® or Fiberglass Depth Cartridges with the HP30 (30 gpm) unit should be limited to oils with a viscosity of 100 SSU or less. Transformer and circuit breaker oils are acceptable. This limitation does not apply when using pleated media cartridges.
The HP30 unit should only be specified for use on insulating oil with a viscosity of 100 SSU. Please contact Velcon regarding application of the HP30 to other, more viscous fluids.


SPECIFICATIONS


Standard Features, all HP Series Models

OPTIONS & ACCESSORIES

 

HP10<
HP30<
 
550Y030<
550Y040<
Flow Control Bypass<
552Y040<
552Y050<
Filter Bypass<
440Y005<
440Y007<
“Y” Suction Strainer<
440Y104<
440Y106<
Basket Suction Strainer<
553Y040<
553Y050<
4-Way Inlet Valve<
554Y040<
554Y050<
Full Port Isolation Valves (2 ea)<
725Y003<
725Y003<
Pressure Shut-Off Switch (w/o alarm light)<
725Z003<
725Z003<
Pressure Shut-Off Switch (w/alarm light)<
703Y004<
703Y004<
Differential Pressure Gauge<
440Y404<
440Y404<
Automatic Air Eliminator<
661Y012<
661Y012<
Remote Stop/Start Switch (w/25 ft cord)<
722Y006<
722Y006<
Digital Flowmeter/Totalizer<
165Y012 <
165Y012 <
Male Cam Connections (2 ea, w/dust caps)<
150Y4XX<
150Y6XX <
Hose w/Male x Female Cams (Specify length in ft, XX = 10, 15, 20, 25)<
151Y4XX <
151Y6XX<
Hose w/Female Cams (Specify length in ft, XX = 10,15, 20, 25)<
165X014<
165X054<
Female Cam x Male NPT Fitting (1 ea, shipped loose)<
165X012<
165X052<
Male Cam x Male NPT Fitting (1 ea, shipped loose)<

 

ORDERING INFORMATION


Specify model number as shown below.

HP10-1<
or<
HP30-1<
115 v, 1-ph, 60 Hz<
HP10-2<
or<
HP30-2<
230 v, 1-ph, 60 Hz<
HP10-3<
or<
HP30-3<
230 v, 3-ph, 60 Hz<
HP10-4<
or<
HP30-4<
460 v, 3-ph, 60 Hz<

 

Also available: 50 Hz power, explosion proof motor, variable speed motor, low rpm motor (contact Velcon)

RECOMMENDED SPARES


1 ea G-1045 Standard Buna-N Lid gasket (or)
1 ea G-1045A Optional Viton-A Lid gasket