Horizontal Filter/Separators HV-xxxx225 Series

Horizontal Filter/Separator Vessels for Fixed Installations at Military Facilities

Meeting USAF Filter/Separator
Specifications Section 15880

EASIER CARTRIDGE CHANGE

Horizontal Filter/Separators HV-225 Series - #1750

The horizontal filter/separator design provides more convenient access to the cartridges than the vertical design.

EFFLUENT CLEANLINESS

A horizontal filter/separator must be drained to change the elements. This prevents the possibility of getting dirt in the effluent that can occur if the operator does not fully drain a vertical vessel when changing elements. The separator mounting holes on a horizontal vessel are in a vertical plane at the top of the vessel so it is nearly impossible to get dirt in the effluent when cartridges are being changed.

TESTED AND APPROVED* VESSELS

Velcon HV-xxxx225 Series Horizontal Filter/Separators are qualified to USAF Specification 15880. This speci­fi­cation is similar to EI 1581, Fifth Edition, Category M. These vessels incorporate one piece threaded base coalescer elements for easy, reliable installation and reusable one piece Teflon® coated screen separators.

* Approval letters are available upon request.

SPECIFICATIONS

STANDARD ACCESSORIES

In compliance with USAF Specification 15880, the following accessories are included for safe, effective operation>

** Does not meet Mil-V-11201

OPTIONAL ACCESSORIES

These optional accessories may be supplied directly by the control valve manufacturer, depending on purchase specifications.

FLOW RATES AND CARTRIDGES

Vessel > Model No.

Flow Rates (1)

USGPM

Coalescer Cartridge
Separator Cartridge

Weight with

Skid (lbs)

Volume> (US gal)
Qty
Model No.
Qty
Model No.
HV2238225
300
4
I-638MMTB
2
SO-430V5
1000
85
HV2838225
600
7
I-638MMTB
2
SO-636V5
1175
140
HV3456225
1200
10
I-656MMTB
3
SO-648V5>
2100
335

Note: (1) For Jet A, Jet A-1, Jet B, JP-4, JP-5, JP-8